DIN Standard Sanitary Concentric Reducer Long or Short
| Size | Height | Large Diameter | Thickness 1 | Small Diameter | Thickness 2 |
| DN20/15 | 11 | 22.0 | 1.5 | 18.0 | 1.5 |
| DN25/20 | 16.5 | 28.0 | 1.5 | 22.0 | 1.5 |
| DN32/20 | 33.0 | 34.0 | 1.5 | 22.0 | 1.5 |
| DN32/25 | 16.5 | 34.0 | 1.5 | 28.0 | 1.5 |
| DN40/20 | 49.5 | 40.0 | 1.5 | 22.0 | 1.5 |
| DN40/25 | 33.0 | 40.0 | 1.5 | 28.0 | 1.5 |
| DN40/32 | 16.5 | 40.0 | 1.5 | 34.0 | 1.5 |
| DN50/25 | 66 | 52.0 | 1.5 | 28.0 | 1.5 |
| DN50/32 | 49.5 | 52.0 | 1.5 | 34.0 | 1.5 |
| DN50/40 | 33 | 52.0 | 1.5 | 40.0 | 1.5 |
| DN65/25 | 110 | 70.0 | 2.0 | 28.0 | 1.5 |
| DN65/32 | 93.5 | 70.0 | 2.0 | 34.0 | 1.5 |
| DN65/40 | 77 | 70.0 | 2.0 | 40.0 | 1.5 |
| DN65/50 | 44 | 70.0 | 2.0 | 52.0 | 1.5 |
| DN80/40 | 118.2 | 85.0 | 2.0 | 40.0 | 1.5 |
| DN80/50 | 85 | 85.0 | 2.0 | 52.0 | 1.5 |
| DN80/65 | 41.2 | 85.0 | 2.0 | 70.0 | 2.0 |
| DN100/40 | 112.0 | 104.0 | 2.0 | 40.0 | 1.5 |
| DN100/50 | 137.5 | 104.0 | 2.0 | 52.0 | 1.5 |
| DN100/65 | 93.5 | 104.0 | 2.0 | 70.0 | 2.0 |
| DN100/80 | 58.5 | 104.0 | 2.0 | 85.0 | 2.0 |
DELIVERY:
Usually within 15days after receiving T/T down payment
PAYMENT:
We prefer to do 100% T/T (30% T/T in advance, 70% T/T before shipment)
FAQ:
I. Are you factory?
Yes,we are factory and we're specilized in manufacturing valve for 15 years.
II. Which countries do you expot to?
We're exporting to about 40 countries around the world. For Europe and America Area ,it takes about 30%,Middle East area:40%, Africa area:30%.
III. If you can do valve in our brand?
Yes,we can do your brand,but need you to provide the certificate of authrization for us.
IV. Where is your factory ?
Our factoury is located in Wenzhou city. If you have time ,welcome to visit us!
V.Which delivery port do you usually use?
There are three port we usually use:Shanghai pot,ningbo port,Wuhu port.
VI,What kinds of certificates do you have?
We have ISO9001:2000 quality certificates,3A certificatesand ISO14001:2014
Material: AISI304, AISI304L, AISI316, AISI316L
Surface Finish: 180 grit, 240 grit, 320 grit, 420 grit, unpolished
Standard: DIN/SMS/3A/ISO/IDF
Flux domination of pipeline: DN10-DN200&1/4""-8", applied to the stainless steel pipeline system
Working principle: Can be welded on the pipeline and adjust the flow qty in the pipe line.
Medium: Beer, Dairy, Beverage, Pharmacy.
We can supply this item with weld end, clamp end, and thread end connection. Requiring more detail information or catalog pls don't hesitate to contact us. For all our products, we can also produce according to ur drawing if ur Specification is out of our standard...
OUR INSPECTION
work principle:
this kind of valve can be handled both by manual or an electric actuator ,and also can be handled by a pneumatic actuator.
Electric actuator or pneumator or pneumatic actuator is to covert the axial movement of piston to be 90 degree rotation of valve shaft.So that the valve can be open or close to achieve the requirment of control and open /close for the pipeline system.They have three type of actator: normally open (NO),normally closed (NC),air/air(A/A)
| Product Name: | |
| Material: | SS304 or SS316L |
| Standard: | 3A, SMS, DIN, RJT, IDF |
| Size: | 1/2"-8" or DN15-DN200 |
| Connection Way: | Weld, Clamp, Male, Female, Flange, or Combinations |
| Operated: | Manual, Pneumatic, Electric |
| Manual Handle: | Pull Handle (2-4 Positions), Plastic Trigger Handle (13 Positions), Stainless Steel Trigger Handle (13 Positions) |
| Seal Material: | Silicone, EPDM, Viton, NBR |
| Surface Finishing: | Ra≤0.8 |
| Working Temperature: | -10 degree to +120 degree (EPDM) |
| Working Pressure: | 0.2-10 Bar (DN25-DN100), 0.2-8 Bar (DN125-DN150) |
| Packing Details: | Usually bubble pack for each butterfly valve within carton box, Plywood case is also available depends on the quantity and the way of transport. |
aterial gradeAISI304, AISI304L, AISI316, AISI316LSurface Finish180 grit, 240 grit, 320 grit, 420 grit, unpolishedStandardDIN/SMS/ISO/IDFsizeDN10-DN200&1/4""-8",end connectionweld or clamp
